| 产品型号 SUPU ID |
IOL1B-M12P8-UV0 |
||
| 材质 Material |
壳体材料：PBT;连接器外壳材料：铜合金 |
||
| 防护等级 Protection Level |
IP67 | ||
| 工作温度 Work temperature |
-25~+70℃ | ||
| 插拔寿命 Plugging life-cycle |
100次
100 times
|
||
| 接地保护 Ground protection |
有，镀锡不锈钢 |
||
| 印字信息 Print Information |
外壳采用UV印刷，也可定制模具logo |
||
| 圆形连接器 Round connector |
黑色、绿色可选，其他颜色需定制 |
||
|
网络接口：
Network interface
|
M12,D编码，母头2个
M12, D-Code, 2 females
|
|
电源接口：
Network Interface
|
M12，L-Code，5针，公头母头各1个
M12, L-Code,5 pins,1 male and 1 female
|
|
连接：I/O 端口
Connection: I/O port
|
M12，A 编码，母头8个。排布孔距增大，适配多种Y型连接器，安装不干涉。
M12,A-code,8 females.The hole spacing of the arrangement is increased, and it is suitable for a variety of Y-type connectors, and the installation does not interfere.
|
|
系统标记板
System Mark Board
|
1个
1 PCS
|
|
IO标记板
IO Mark Board
|
8个
8 PCS
|
|
系统指示灯
System indicator light
|
4个
4 PCS
|
|
IO指示灯
IOindicator light
|
可选8个或16个。
8 PCS or 16 PCS
|
|
安装螺钉尺寸推荐
The recommended size of
the mounting screw
|
GB/T 70.1 M4×30 螺纹规格d=M4ˎ公称长度L=30mm的内六角圆柱头螺钉
GB/T 70.1 M4×30 Thread specification d=M4ˎNominal length L=30mm hexagon socket head screw
|
|
M12 D-code母头 |
M12 L-code公头
M12 L-code male
|
| 额定电压250V 额定电流4A Rated voltage 250V Rated current 4A |
额定电压63V 额定电流16A Rated voltage 63V Rated current 16A |
| M12 L-code母头 M12 L-code female |
M12 A-code母头 M12 A-code female |
| 额定电压63V 额定电流16A Rated voltage 63V Rated current 16A |
额定电压60V 额定电流4A Rated voltage 60V Rated current 4A |
|
PCB板推荐厚度
The recommended thickness of the PCB board
|
PCB板背面与外壳底边高度
The height of the back of the PCB and the bottom edge of the enclosure
|
元器件推荐高度
The recommended height of the component
|
| 1mm | 6mm | 4mm |
| 1.6mm | 5.4mm | 3.4mm |
|
主站采用的灌胶:PCB板后灌黑色环氧树脂
The epoxy used in the device station:black epoxy resin is poured after the PCB board
|
|
注：安装螺钉推荐尺寸为ST2.2*10.0十字圆头
Note:The recommended size of the mounting screw is ST2.2*10.0 cross round head.
|
.png)
| 产品照 | 产品名称 | 产品描述 | 加入询价 |
|---|
如果您想全面深入地了解我们的产品，速普电子提样品供用户体验
